BLEED RINGS WITH MACHINED FINISH LINE SIZE 900# 1500# I.D. O.D. T - with 1/2" or 3/4" Tap T - with 1" Tap I.D. O.D. T - with 1/2" or 3/4" Tap T - with 1" Tap 1/2 5/8 2 3/8 1 1/2 2 1/2 5/8 2 3/8 1 1/2 2 1/2 3/4 7/8 2 5/8 1 1/2 2 1/2 7/8 25/8 1 1/2 2 1/2 1 1 1/8 3 1 1/2 2 1/2 1 1/8 3 1 1/2 2 1/2 1 1/4 1 5/8 3 3/8 1 1/2 2 1/2 1 5/8 3 3/8 1 1/2 2 1/2 1 1/2 1 3/4 3 3/4 1 1/2 2 1/2 1 3/4 3 3/4 1 1/2 2 1/2 2 2 1/4 5 1/2 1 1/2 2 1/2 2 1/4 5 1/2 1 1/2 2 1/2 2 1/2 2 5/8 6 3/8 1 1/2 2 1/2 2 5/8 6 3/8 1 1/2 2 1/2 3 3 1/4 6 1/2 1 1/2 2 1/2 3 1/4 6 3/4 1 1/2 2 1/2 4 4 1/4 8 1 1/2 2 1/2 4 1/4 8 1/8 1 1/2 2 1/2 5 5 1/4 9 5/8 1 1/2 2 1/2 5 1/4 9 7/8 1 1/2 2 1/2 6 6 1/4 11 1 1/2 2 1/2 6 1/4 11 1 1/2 2 1/2 8 8 1/4 14 1 1/2 2 1/2 8 1/4 13 3/4 1 1/2 2 1/2 10 10 1/4 17 1 1/2 2 1/2 10 1/4 17 1 1/2 2 1/2 12 12 1/4 19 1/2 1 1/2 2 1/2 12 1/4 20 3/8 1 1/2 2 1/2 14 13 1/2 20 3/8 1 1/2 2 1/2 13 1/2 22 5/8 1 1/2 2 1/2 16 15 1/2 22 1/2 1 1/2 2 1/2 15 1/2 25 1/8 1 1/2 2 1/2 18 18 1/2 25 1 1/2 2 1/2 18 1/2 27 5/8 1 1/2 2 1/2 20 20 1/2 27 3/8 1 1/2 2 1/2 20 1/2 29 5/8 1 1/2 2 1/2 24 24 1/2 32 7/8 1 1/2 2 1/2 24 1/2 35 3/8 1 1/2 2 1/2 2350 Industrial Road, Sapulpa, OK 74066 • Main: 918-445-1141 • sales@weamco.com Bulletin BR-112 Toll Free: 800-331-3790 • Fax: 918-445-4617 • www.weamco.com 5-19 Page 2 of 4 Bleed Rings Materials & Specifications •  Standard material: Carbon Steel ASME SA 516 Gr 70. Other available on request • Carbon Steel rings have one coat of shop primer •  Thickness shown is based upon ASME code B31.3-2014 •  OD, ID & RTJ dimensions to fit flanges manufactured in accordance with ASME B16.5 •  Tolerances: ID and OD +/- 1/8” Thickness +/- 1/16” • For special sizes and types not shown please contact Weamco Minimum Information Required for RFQ: 1. Quantity 2. Line size 3. Flange rating 4. Flange facing 5. Weamco type 6 Material 7.  For RTJ and/or high pressure rings advise design pressure and temperature, or thickness required. All dimensions are in inches.