Truncated Basket Strainers 2350 Industrial Road, Sapulpa, OK 74066 • Main: 918-445-1141 • sales@weamco.com Bulletin BP-112 Toll Free: 800-331-3790 • Fax: 918-445-4617 • www.weamco.com 5-19 Page 1 of 2 TYPE BWI Wire cloth inside Heavier support outside • All dimensions are in inches • Standard lengths are designed to fit weld neck flange plus long radius weld elbow • OD is designed to fit inside flange bolt hole circle • Full face with bolt holes is available • ID is designed to fit inside standard weight pipe for 150# and 300# ASME, extra strong pipe for 600# ASME • Advise pipe wall or schedule for higher pressure ratings • See Bulletin CP112 for additional temporary strainer information LINE SIZE (IN.) LENGTH LB BASED ON % OF OPEN AREA 100% (STANDARD LENGTH) 150% 200% 300% 2 2 1/2 4 5 6 3 3 5 7 8 4 5 7 9 11 6 6 9 12 17 8 8 11 14 21 10 11 15 19 27 12 12 18 22 32 14 13 18 23 33 16 14 21 25 38 18 17 23 28 43 20 19 26 31 48 24 23 32 40 57 30 28 40 50 71 36 38 50 60 84 Open area ratios are based on cross sectional flow area of standard weight pipe, using a 40% open area basket media (see Bulletin AC-112). 12 GA. (C.S. STD) 14 GA. (C.S. STD) TYPE BP 1 ply perforated plate TYPE BW 1 ply heavy wire (SS) TYPE BWO Wire cloth outside Heavier support inside TYPE BTP Wire cloth between Heavier support inside and outside