TYPE CWI Wire cloth inside Heavier support outside TYPE CWO Wire cloth outside Heavier support inside Cone Strainers •  All dimensions are in inches •  Standard lengths are designed to fit weld neck flange plus long radius weld elbow •  OD is designed to fit inside flange bolt hole circle •  Full face with bolt holes is available •  ID is designed to fit inside standard weight pipe for 150# and 300# ASME, extra strong pipe for 600# ASME •  Advise pipe wall or schedule for higher pressure ratings •  See Bulletin BP112 for additional temporary strainer information 2350 Industrial Road, Sapulpa, OK 74066 • Main: 918-445-1141 • sales@weamco.com Bulletin CP-112 Toll Free: 800-331-3790 • Fax: 918-445-4617 • www.weamco.com 5-19 Page 1 of 2 LINE SIZE (IN.) LENGTH LC BASED ON % OF OPEN AREA 100% (STANDARD LENGTH) 150% 200% 300% 2 4 6 8 11 3 6 9 12 18 4 8 10 13 20 6 11 13 18 27 8 12 17 23 34 10 14 22 29 44 12 16 26 35 50 14 18 27 36 53 16 21 31 40 60 18 24 35 46 68 20 26 39 51 76 24 31 45 60 90 30 38 57 76 114 36 44 66 88 126 Open area ratios are based on cross sectional flow area of standard weight pipe, using a 40% open area basket media (see Bulletin AC-112). TYPE CP 1 ply perforated plate TYPE CW 1 ply heavy wire (SS) TYPE CTP Wire cloth between Heavier support inside and outside 12 GA. (C.S. STD) 14 GA. (C.S. STD)