Product Catalog

Strainers

Fabricated Strainers

Fabricated Y Strainer

FY-112
View Details

Tee Strainers

TEE-112
View Details

Type FH for horizontal pipe run

FH-112
View Details

Type FT for Horizontal or Vertical Pipe Runs

FT-112
View Details

Type FV for horizontal pipe run

FV-112
View Details

Temporary/Start-Up Strainers

Cone Strainers

CP-112
View Details

Truncated Basket Strainer

BP-112
View Details

Cast Strainers

Cast Simplex Basket Strainer

WM Series
View Details

Cast Y Strainer

WM Series
View Details

Spare Basket

Spare / Replacement Baskets

SB-022
View Details

Pressure Drop Graphs

Type FV

PDG-FV
View Details

Type FT

PDG-FT
View Details

Type FH

PDG-FH
View Details

Cast Y

PDG-WMY
View Details

Cast Simplex

PDG-WMS
View Details

Meter Provers

Bidirectional Pipe Provers

Bidirectional Meter Prover

BDP-112
View Details

Unidirectional Pipe Provers

Unidirectional Prover

UFP-112
View Details

Portable Pipe Provers

Portable Meter Provers

PVP-112
View Details

Pipe Prover Refurbishment

Prover Refurbishment

PVP-112
View Details

Meter Prover Accessories

Mag-Tek™ 24 VDC 4-Way Valve Actuator

PN 2412610
View Details

Sphere Pumps

SP-112
View Details

Sphere Removal Products

SRP-022
View Details

Sphere Sizing Products

SSP-022
View Details

Spheres

SPH-022
View Details

Other Products

Corrosion Coupon Holder

Corrosion Coupon Holder

CH-100 / CH-200
View Details

Paddle & Spectacle Blinds & Spacer Rings

Paddle & Spectacle Blinds

LB-112
View Details

Bleed Rings

Bleed Rings

BR-112
View Details

Sphere Detector Switches

Mag-Tek Sphere Detector Switches

Model M-6

M6-112
View Details

Model M-6T Designed for non-lubricated, dry and dirty services.

M6T-112
View Details

Mag-Tek™ Switch Adaptions to older or other mfg. switch bases

M6-112
View Details

Spare/Replacement Element Kits

Sphere Detector Switch Element Kit

MT-022
View Details

General FAQ

Estimating pressure drop across strainers?

Weamco has pressure drop charts and graphs available for a variety of our strainers. (Please see specific strainer on web site or feel free to contact us at your convenience.)
The information on our charts and graphs is a combination of substantial engineering and a vast amount of actual experience.

In regards to estimating pressure drop across a clogged strainer, Weamco is very cautious and we typically resist engaging in this practice due to our many years of experience. Although there has been an attempt by many to estimate this scenario i.e., pressure drop of a clogged basket, we know from actual test results that the actual area clogged can have a significant influence to the flow and resulting pressure drop results. With this in mind since there is no way to know the pattern of the clogging of a basket at any given time, it is very difficult to accurately estimate the affect to pressure drop.

Still have questions? Contact Us

Calculating basket open area ratios (OAR)?

A common term used in strainer design is “Open Area Ratio (OAR)”. This equals the total open basket area divided by the internal cross-sectional area of the inlet pipe.

Published open area ratios for Weamco products are typically figured using a single 40% open area basket media. Open area ratios for Weamco fabricated permanent strainer types are calculated using the line of site method. There are two methods of instruction typically recommended by recognized establishments and manufacturers for calculating the open area of a strainer basket. One method referred to by the US military as “line of sight” uses the accrual of the open areas of the basket medias in series. Using this method, a 40% open area media in series with a 50% open area media has a calculated combined open area of 20%. An alternative method used in accordance with the US Underwriters Laboratories Standards, allows for the use of only the open area of the more restrictive media in the series. This would be 40% for the example above. In either case, the method used should be documented, as it has a direct impact on strainer design parameters such as sizing and estimating pressure drops.

Still have questions? Contact Us

What types of meter provers does Weamco manufacture?

• Bi-Directional pipe provers both stationary and mobile:
A positive displacement type prover with flow and displacer (usually a sphere) traveling in both directions by means of a 4-way diverter valve.
• Uni-Directional pipe provers both stationary and mobile:
A positive displacement type prover with flow and displacer (usually a sphere) traveling always in one direction, by means of a transfer chamber, or interchange.
• Volumetric Tank Prover:
As the name implies, this prover is a calibrated tank or vessel with a sight gauge and scale to read a metered volume. The flow must be stopped to determine the
volume.

Still have questions? Contact Us

Where is the best place to buy a conventional Liquid Meter Prover?

Weamco of course!

Still have questions? Contact Us

Who is API?

The American Petroleum Institute (API) represents all segments of America’s oil and natural gas industry. Its nearly 600 members produce, process and distribute most of the nation’s energy. The industry supports millions of U.S. jobs and is backed by a growing grassroots movement of millions of Americans. API was formed in 1919 as a standards-setting organization. In their first 100 years, API developed more than 700 standards to enhance operational and environmental safety, efficiency and sustainability.

Still have questions? Contact Us

Who is NIST?

Founded in 1901, NIST is a non-regulatory federal agency within the U.S. Department of Commerce. According to NIST, their mission is to promote U.S. innovation and industrial competitiveness by advancing measurement science, standards, and technology in ways that enhance economic security and improve our quality of life.
The calibration services of NIST are designed to help the makers of precision instruments achieve the highest possible levels of measurement quality and productivity.

Still have questions? Contact Us

What does liquid custody transfer mean?

Liquid custody transfer is defined as a metering point (location) where a fluid is being measured for sale from one party to another.

Still have questions? Contact Us

Product Receiving and Installation

Weamco Products are carefully packed and prepared for shipping specifically to best prevent damage during transportation. Care should always be taken during product unpacking and installation to prevent damage to the product including all flange or sealing surfaces, along with any additional instrumentation or attachments that may be present. Any handling instructions shown on the product, product drawings, packing and or containers should be closely adhered to.

An initial inspection of all products and packaging should be done at time of receipt. Upon inspection, if any “damage to product or packaging” is evident, immediately bring this to the attending delivery persons attention and document the damage including pictures if possible. If they are no longer present, contact the company or individual responsible for shipping and request that a representative of the shipping carrier be present before further removal or unpacking of the product. Please feel free to contact Weamco or your local Weamco representative at any time for assistance.

Still have questions? Contact Us

View All FAQs